Frequent Questions

  • [FAQ] PGA900: Questions EVM Related to the PGA900, PGA300, PGA302 and PGA305 Devices

    Part Number: PGA900 Other Parts Discussed in Thread: PGA305 Tool/software: I have some questions regarding the EVM and software as follows: Issues related to .net Issues related to the gain computation button Corrupted PGA305 user’s guide…

  • [FAQ] PGA900: Questions DAC Related to the PGA900, PGA300, PGA302 and PGA305 Devices

    Part Number: PGA900 Tool/software: I have some questions regarding the use of the DAC on the PGA devices as follows: How do I get my +/-20mV input signal from my sensor to correspond to 0 to 3V on my DAC output? What does it mean by ratiometric…

  • [FAQ] PGA900: Questions ADC Related to the PGA900, PGA300, PGA302 and PGA305 Devices

    Part Number: PGA900 Other Parts Discussed in Thread: PGA305 Tool/software: I have the following questions related to the ADCs on the PGA devices: Can I float the ADC inputs? What is the ADC sampling rate? What temperature accuracy can I expect…

  • [FAQ] PGA900: Questions Regarding Sensor Connections to the PGA900, PGA300, PGA302, and PGA305 Devices

    Part Number: PGA900 Tool/software: I have some questions regarding connecting external sensors to the PGA inputs. The questions are as follows: If I want to use an external temp sensor instead of the internal, how do I set it up and use it? If I…

  • [FAQ] TDA4AH-Q1: How to edit/change ONNX graph to remove unsupported layers by TIDL and add supported ones

    Part Number: TDA4AH-Q1 Tool/software: I have ONNX graph with below mentioned layer structure. Which tools can i use to change the unsupported layer (HardSwish) to Supported ones ?

  • [FAQ] What is split output and how to use it?

    Other Parts Discussed in Thread: LMG1020 , UCC57108 TI gate drivers use a pull-up and pull-down structure in the output stage in order to drive a power device. The pull-up structure supplies the source current to turn on the power device, and the pull…

  • [FAQ] PGA900: Questions Regarding the Coefficients Used in the PGA900, PGA300, PGA302, and PGA305 Devices

    Part Number: PGA900 Other Parts Discussed in Thread: PGA300 , , PGA305 Tool/software: I'm trying to understand the polynomial used for the linearization and temperature compensation. How do I calculate the coefficients and how are they used?

  • [FAQ] PGA900: Questions Regarding the EEPROM used on the PGA900, PGA300, PGA302 and PGA305 Devices

    Part Number: PGA900 Tool/software: I have the following questions: What is the EEPROM used for on the PGA devices? Can undesignated bytes be used for other purposes? What is the process of storing the coefficients in EEPROM? I have negative…

  • [FAQ] SK-TDA4VM: No graphics acceleration on SDK 9.x in Wayland (Weston)

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM Tool/software: Hi, TI Team I run an opencv example program(drawing and media play) in Wayland(western). But drawing(graphics) is little bit slow and media play occurs a stuttering frames…

  • [FAQ] AM623: 4GB LPDDR4

    Part Number: AM623 Tool/software: Hi team, A customer wants to have 4GB LPDDR4 (single channel topology). They could not find 4GB 16-bit single-channel LPDDR4, there is only 2GB option. Can they use a 32-bit device and only connect one channel?…

View FAQ threads
Recommended For You