• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 49 subscribers
  • Views 184 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BUF802RGTEVM: Unpopulated is annoying... but no BOM??

BUF802RGTEVM: EVM populated or not?

Nithin Abraham
Prodigy 30 points
Part Number: BUF802RGTEVM
Other Parts Discussed in Thread: BUF802

Hello,

I am interested in purchasing BUF802RGTEVM. I would like to know if it is a populated board or not. Also, if you have some info about the bandwidth when the board is modified for DC coupling by shorting C44 in the design, it would be helpful.

  • +1
    TI__Expert 6190 points

    Hi Nithin,

    The BUF802RGTEVM is a populated board. The previous E2E thread was a mishap which was corrected, however please reach out if for some reason it is not a populated board. As for the bandwidth of the board in a DC configuration. We do not have data specific to the EVM itself, however the EVM board was designed with the similar layout/design considerations as the boards used to characterize and collect the data highlighted in the BUF802 datasheet. It is designed to reflect the performance in the datasheet.

    Best Regards,

    Ignacio

  • 0 in reply to Ignacio Vazquez Lam1
    Prodigy 30 points

    Hello Ignacio,

    Thanks for the response