• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMH6702: Looking for a SPICE model for the LMH6702

LMH6702: S-Parameter

Marvin Cantos
Expert 5345 points
Part Number: LMH6702

Hi Team, 

Good day. I am posting this inquiry on behalf of the customer.

"We wanted an S-Parameter file (S2P file) of a low-distortion opamp - LMH6702. We could get the SPICE model for TINA, but we needed to simulate the same using other simulation software such as ADS."

Please help to advise if we have an available S-Parameter of  LMH6702.

Thank you for your help.

Kind regards, 

Marvin

  • 0
    TI__Genius 17276 points

    Hello Marvin,

    Please advise the customer that TI HSAMPs does not have s-parameter data at the ready for the LMH6702.  If they would like, they can use the LMH6702 in lab to measure the s-parameters and compile the data themselves; it is relatively simple to build an sXp (2 for two-port) file type.  The data is just columnized s-parameters.

    If the customer has further questions or comments, please relay them here.

    Best,

    Alec