• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 167 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TLV9062-Q1: Input Bias Current

TLV9062-Q1: Questions about the FuSa files of TLV9062-Q1

Manu Chang
Intellectual 1070 points
Part Number: TLV9062-Q1

Hi Team,

I am reading the file Functional Safety FIT Rate, FMD and Pin FMA on ti.com and have some questions. 

In the failure mode, how should I understand the out saturation high and out saturation low failure modes, could you pls explain this?

Thanks a lot!

BR,

Manu

  • 0
    TI__Genius 10980 points

    Hi Manu, 

    "Out saturate high" and "Out saturate low" refers to the op amp output is close or at the supply rails and is no longer in the linear operating range. 

    Please let me know if you have further questions.
    Thank you!

    Best Regards,
    Ashley