OPA2192: Request about metal lid

Miguel Ballesteros Delgado

Part Number: OPA2192

Tool/software:

Dear Texas Instruments colleagues,

I am Miguel Ballesteros, member of the PE department at Alter Technology. Could you please confirm if the following components has metal lid connections to ground?

OPA2192ID: https://www.ti.com/lit/gpn/OPA2192

5962L0620602VZA: https://www.ti.com/lit/gpn/LMP2012QML-SP

5962F9553602VXA: https://www.ti.com/lit/gpn/lm7171qml-sp

5962R1222403VXC: https://www.ti.com/lit/gpn/TPS7A4501-SP

ADS1278MHFQ-MLS: https://www.ti.com/lit/gpn/ADS1278-SP

5962R0722701VZA: https://www.ti.com/lit/gpn/ADC128S102QML-SP

5962R0722602VZA: https://www.ti.com/lit/gpn/DAC121S101QML-SP

If you have any doubts, don't hesitate to text me again.

Thank in advance.

Best regards,

Miguel.

4 months ago

0 Michael Hartshorne 4 months ago

TI__Genius 12215 points

Hi Miguel,

To get answers for each device, you will need to post separate threads for each one. Many of them can already be found by searching the existing posts on the forum. I can answer for the first two amplifiers, the other devices will be covered by a different team.

For LMP2012QML-SP, it is floating, see below:

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1215297/lmp2012qml-sp-lid-grounded?

The OPA2192ID does not have a metal lid.

I hope this helps.

Regards,
Mike

Amplifiers

Amplifiers forum

OPA2192: Request about metal lid