This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV9002-Q1: Compatibility vs. Rohm/MSOP-8 package

Part Number: TLV9002-Q1
Other Parts Discussed in Thread: OPA2377-Q1

Tool/software:

Dear team,

I would like to propose the pin-to-pin alternative vs. Rohm/ TLR2377YFVM-CTR (MSOP-8). Do we have any package which is drop-in with Rohm/MSOP-8?

DGK is same package size but pin width is completely different.

Thank you for your support.
Yuto Kitamura

  • It should be possible to create a footprint that allows both MSOP-8 and DGK; even a standard footprint might work. (PW would be even wider.)

    Looking at the electrical characteristics, the OPA2377-Q1 would be a better match.

  • Hello Yuto-san,

    We currently do not have a true pin to pin with the same footprint as ROHM's MSOP package. However, Clemens is correct that a footprint can be created for both by making the landing pattern longer. Here are the two footprints laid on top of each other.

    Best,
    Jerry