This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
We use DI-Water (Deionized Water) via Aqueous Machine after Reflow/Wave Soldering Process, along with other Components on PCB.
What are your recommended part cleaning/washing procedures and/or processes as applied to PCB cleaning on the following part?
OPA2991IDDFR
SN74AHCT04DBR
Hello Jing,
Please see the following document for cleaning recommendations.
https://www.ti.com/lit/an/snoa550h/snoa550h.pdf
I believe OPA2991 should be compatible with unpowered cleaning using DI water.
The SN74 device belongs to another team, I will forward this thread to them.
Best,
Jerry