There is a TV Detect on the OPA361 datasheet.
Has anyone tried this using OPA360 (I need for different gain requirement).
Patrick
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Patrick,
The OPA360 can be used in a similar fashion for TV Detect as is mentioned in the OPA361 datasheet, with the 10k pull-up resistor connected after the 75ohms output to sense whether external TV is connected (output pulled low) or disconnected (output pulled high) to enable/disable the OPA360.
Best Regards,
Rohit