• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 251 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

THS7303: SCL

THS7303: I2C DTA line stuck low

tom White
Prodigy 10 points
Part Number: THS7303


I2C line stuck low - dispite following I2C register flushing

  • 0
    TI__Mastermind 29595 points

    Hello,

        Would you be able to give me a list of steps you tried. I am guessing from mentioning register flushing, you tried to writing to register example shown on page 44 with regards to the issue with power up mentioned on page 41 of the datasheet? Are you receiving any acknowledgment from the THS7303 after the start command + general address?

    Thank you,

    Sima