confirm information

user5184406

Intellectual 395 points

Other Parts Discussed in Thread: THS4551

Support Path: /Product/Development and troubleshooting/Find key information on a device/

Can you help me confirm the Part Number for the picture as follows?

The first line is XJ51.The second line is 698.The last line is A6GC.

Thank you.

over 5 years ago

0 Ed Walker over 5 years ago

Prodigy 5 points

Hello user5184406,
In order to verify the device, TI needs to know how it was purchased.
Please provide the TI Distributor it was acquired from and what part number you expect it to be.
TI can then find the details on the device.

0 user5184406 over 5 years ago in reply to Ed Walker

Intellectual 395 points

I purchased the part that Part Number is THS4551IRUNR.And I ordered them from Mouser.But I received the part which marking as shown above.So can you help me confirm I received is correct or not?
Thank you.

0 Ed Walker over 5 years ago in reply to user5184406

Prodigy 5 points

Hello, I have notified the team that supports the THS4551.
You can expect a response within 24 hours.

0 Jacob Freet over 5 years ago in reply to Ed Walker

TI__Expert 7875 points

Hi,

We are looking into the origin of the device marking and should have an answer for you shortly. Is there any reason you are concerned about the particular device you received?

Regards,

0 Jacob Freet over 5 years ago in reply to Jacob Freet

TI__Expert 7875 points

Hi,

Can you share with me your shipping information from Mouser for this device?

Thank you,

0 user5184406 over 5 years ago in reply to Jacob Freet

Intellectual 395 points

Hi,

I saw your last message" Can you share with me your shipping information from Mouser for this device. The markings on it are actually from a pre-production engineering samples build. For this device there is no functional difference between the pre-production and production devices, but it is not typical that they would end up in distributor inventory. ", but why you deleted that message?

Another question about the shipping information, can you point what is the detailed information? sale number? tracking number?

0 Jacob Freet over 5 years ago in reply to user5184406

TI__Expert 7875 points

Hi,

If you can share your customer service representative contact at mouser?

Thank you,

0 user5184406 over 5 years ago in reply to Jacob Freet

Intellectual 395 points

Hi,

The customer service representative at mouser is Hu Beibei, email address is Beibei.Hu@mouser.com.

Thank you.

0 user5184406 over 5 years ago in reply to Jacob Freet

Intellectual 395 points

Hi,

Our shipping information from Mouser : Invoice is 48482753, Sales number is POM180613-SZ-27, pls help check.

Thank you

0 user5184406 over 5 years ago in reply to Jacob Freet

Intellectual 395 points

Hi,

If there is any news about this question? If we received correct parts? and is there any evidence?

0 Jacob Freet over 5 years ago in reply to user5184406

TI__Expert 7875 points

Hi,

I am working directly with Mouser on this issue. The parts are the correct device but they have the wrong topside marking. We are working to have mouser exchange them for parts with the correct marking. My apologies for the confusion.

Regards,

0 Jacob Freet over 5 years ago in reply to user5184406

TI__Expert 7875 points

Hi,

Apologies for the slow reply. I have been in contact with mouser and they should be in touch with you to exchange parts. The device you have are the correct device, but just have the wrong marking on them.

Regards,

0 user5184406 over 5 years ago in reply to Jacob Freet

Intellectual 395 points

Hi,

Ok, we will wait for mouser's reply.
Thank you

0 Jacob Freet over 5 years ago in reply to user5184406

TI__Expert 7875 points

Hi,

The parts you have are internally correct, but they are not marked properly. We have confirmed that they are still the right devices and are trying to work with mouser to have them exchanged for ones with proper markings. My apologies for the slow process.

Regards,

Audio

Audio forum

confirm information