• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 115 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5601: How to set-up 4x10W configuration?

Thomas Van Aken
Intellectual 380 points
Part Number: TAS5601

Dear

Is there an example for code and hardware, how to use the 4x10W config?

Greetings

Thomas Van Aken

  • 0
    TI__Genius 14420 points

    Hello Thomas,

    In the datasheet Figure 2 highlights the 4x10W configuration, insofar as the code I would need to check internally since this is an older device the SW was previously given on the CD that came with the EVM.

    For this project is this an evaluation for a future project or an existing system? May I ask why the TAS5601 is being used since it's an older device and there might be newer devices in our portfolio that would offer better performance/features/or cost and significantly streamlined SW/Firmware development.

    Best regards,

    Luis