Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PCM1795: Behavior when power off for PCM1795

PCM1795: Power on/off sequencing

Yuki
Prodigy 30 points
Part Number: PCM1795

Hello.

I am currently planning to use PCM1795 for my project.

Referring to the datasheet, there was no specific mention of the power sequence for the PCM1795, other than the specification of power-on reset.

Are there any other restrictions on the power on/off sequence?

By the way, I see that there was a document called PCM1xxx_Power_Sequencing_AppNote in one of the past questions in the forum, is this no longer available?

Thank you and best regards,

Yuki

  • +1
    TI__Mastermind 32615 points

    Hi Yuki-san,

    Power-on reset (Figure 45) is the power sequence information, it is just emphasizing that it is a type of reset also. There should be no other kinds of restrictions on the power sequencing. 

    It seems the link to that note was removed, so it is unfortunately not available.

    Best Regards,

    Jeff