TAS6584Q1EVM: PurePath Console 3 v3.2.1 Build 306 & TAS6584 3.03 cannot connect to EVM through USB (Windows 11)

Hi Thomas

    You could try install the Driver in the below link. But I think we can't fully guarantee the software's performance in Win11 system right now. Also sometimes we met XMOS on the EVM is conflict with some Sound Card in the PC, also hard to solve the problem. Better to try with other computer if problem can't easily go away.

https://tidrive.ext.ti.com/u/lrrlKm065S2EuuUh/384b33e3-d892-48c2-8326-672ce2c2f238?l

Password: U[zQS5K5

Hi Shadow He,

unfortunately I wasn't able to access your link earlier. Now I get an error Message (Link deleted, closed or expired) only.

So could you please send it again?

Thanks in afdvance and best regards

Thomas

Hi Thomas

    Please try below link:

https://tidrive.ext.ti.com/u/jqlfu3UpX72cqV-w/384b33e3-d892-48c2-8326-672ce2c2f238?l

Password: t6ZS?D4H

Hi Shadow He,

thank you very much for submitting the link again.

So, I've installed this driver, connected the TAS6584EVM, the blue USBRDY LED on the EVM lights up, Windows brings messages about device driver installation in progress, ... Device driver installation ready. Than I've started PurePathConsole 3, ... but no success, on the bottom left corner of PPC3: TAS6584 - offline, no connect Button. (pls see attached Picture also)

Do you have any other idea how to solve this? Are there any specific library or framwork versions needed, i. E. Microsoft .Net xxx?

Best regards

Thomas