• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 122 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320ADC3100: About single- ended mode

Tao_2199
Genius 5660 points
Part Number: TLV320ADC3100

Hello,

My customer is asking about single- ended mode on TLV320ADC3100 .

 1) When IN2L/IN2R（or IN3L/IN3R）will be used on single- ended mode,

what should they do with the unconnected input pin (IN2L/IN2R or IN3L/IN3R)?

 2) If they don't use the miniDSP function, do they need to make anything hardware or software(register) configuration?

Regards,

Tao_2199

  • 0
    TI__Mastermind 23305 points

    Hi Tao,

    Unconnected inputs should be AC coupled to GND with 0.47uF cap or similar sized capacitor. That is our recommendation for noise performance however they can be left floating since they are digitally disconnected.

    This device does not have miniDSP, so no nothing needs to be done. The ADC processing blocks are the only options.

    Best regards,
    Jeff McPherson