Other Parts Discussed in Thread: TAD5242
Hello team,
How can I configure I2S master or slave for this device? Can I configure with hardware pin?
For example, TAD5242 is clear that I can configure I2S by hardware pin.
Best Regards,
Kei Kuwahara
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Kei,
This is mentioned in datasheet pin assignment's table. Pin 14 (MAST) in hardware mode makes the device master or slave: Connect this pin to High and device will be in Master mode and BCK/LRCK will be outputs, or connect MAST to LOW and device will be in Slave mode and you need to provide the clks.
Regards,
Arash