TAS5828MEVM: Unable to change the left and right speaker channel

hi tony

can you tell me which process flow you are using.

i will check that.

tks

jesse

Hi jesse

Could you help me check it on the EVM board?

Thank you20230225-ok.ppc3

hi, Tony

the ppc3 file you used belongs to TAS5825P, not the tas5828.

can you share me the tas5828 ppc3 file?

tks

jesse

Sorry , customer actually use the TAS5825P.

So could you help me to check this ppc3 file.

hi, 

so customer's issue happen at tas5825p or tas5828.

if customer use tas5828 with tas5825p gui, then of cause it will have problem.

please let customer change to use tas5828 GUI.

this 2 devices' registers are not the same.

they cannot use same GUI.

tks

jesse

Customer use tas5825 chip and use tas5825EVM software . I make a mistake put this question in tas5828p forum.

So can tas5825p and tas5825M control in same sofware?

I check with customer they used tas5825p and tas5825PEVM software.