I wanted to know if there's a command(s) to allow the ADC output to be dumped to the "log" so I can save it? Thank you, Philip
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I wanted to know if there's a command(s) to allow the ADC output to be dumped to the "log" so I can save it? Thank you, Philip
Hi Philip,
Unfortunately PPC3 has no way of monitoring or dumping the ADC output. What is possible is to use a free software like Audacity or Goldwave and record audio over USB from the ADC. Then you'll be able to save/monitor the data.
Best regards,
Jeff McPherson
Jeff, Okay. Thank you for the quick response. To be clear, I'm just wanting the hex or decimal value....not an audio/auditory recording. I was thinking the I2C Log/IO could do this. Philip
Hi Philip,
Thanks for the clarification, I did misunderstand. However the answer is the same. I wouldn't be surprised though if Audacity or Goldwave are capable of returning data in a hex or decimal format.
Best regards,
Jeff McPherson