Tool/software:
I found that both Address 0x02 and 0x4D are named VREF_CFG.
Do both locations need to have the same value written, or is the name of one of the addresses incorrect?
Hi Sky,
They both should have the same value written according to section 7.1.3 in the datasheet. Thanks.
Regards,
Sam
I found that the description of the 0x50 register function for TAC-5412-Q1 differs between the development software PurePath Console and the datasheet.
The datasheet indicates that bits 2-5 of register 0x50 are reserved,
while the development software shows that bits 2-5 have functions.