• State TI Thinks Resolved
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 31 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

TAA5242: Low power mode and sleep mode

Shoo Saga
Intellectual 1611 points
Part Number: TAA5242

Tool/software:

Hi Team,

What is the difference between Sleep mode and low power mode? Are they same?

If it's same, the trigger to enter sleep/lowpower mode are no audio clock or that MD4 and MD5 are high?

If audio clock exists and MD4/5 are high, still in active mode?

Regards,

Shoo

  • 0
    TI__Intellectual 960 points

    Hi Shoo,

    Yes, sleep mode and low power mode mean the same thing. In regards for the procedure to enter sleep mode, please refer to section 9.2.3 of the datasheet. Active mode configuration is tailored to your application and the process is shown in section 8.4.1 of the datasheet. The MD4 and MD5 pins are mainly used to configure single-ended or differential input mode. Thank you.

    Regards,

    Sam