CC8521+CC2590 used also as a repeater?

Vito Pirrone

Other Parts Discussed in Thread: CC8521, CC2590

Hi everybdy!

I'd like to know if the CC8521 (+CC2590) can be Tx and Rx contemporaneously and if it can be used also as a repeater for the audio wireless signal, possibly with two antennas.

Moreover, I have another question: How many CC85xx can I have in RX , using a CC85xx in TX ?

Thank you in advance,

Vito Pirrone, Italy

over 12 years ago

0 Kjetil over 12 years ago

TI__Mastermind 21125 points

Hi Vito,

The scenario you outline is not possible. The link between two CC85xx devices is bi-directional (despite audio only going in one direction) and the radio itself can only be in either Tx or Rx at the time.

A PurePath Wireless network can, at the moment, consist of one master and up to four slaves.

Best regards,
Kjetil

0 Vito Pirrone over 12 years ago in reply to Kjetil

Prodigy 50 points

Ok I understand.

Thank you so much

Best regards,

Vito

0 Vito Pirrone over 12 years ago in reply to Vito Pirrone

Prodigy 50 points

HI :) I have another question:

In your opinion, is there any component that I can use to make a repeater for the audio signal Tx by the CC85xx?

There is a way to do this?

Thanks,

Vito

0 Kjetil over 12 years ago in reply to Vito Pirrone

TI__Mastermind 21125 points

Hi Vito and potential other readers of this thread,

This question was also posted and answered in a separate thread:
http://e2e.ti.com/support/low_power_rf/f/382/t/168185.aspx

Best regards,
Kjetil

Audio

Audio forum

CC8521+CC2590 used also as a repeater?