• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DIR9001 clock

Derek Xie
Genius 12255 points
Other Parts Discussed in Thread: DIR9001, TAS5713

Hi teams:

                I am puzzled about DIR9001. If I make the DIR9001 work in XTI mode, how can I use just MCLK. I connect the DIR9001's I2S to AIC3254. If I make the AIC3254 work in master mode. There will be two clock in LRCLK and BCLK pin.

 If I use 24.566MHz Oscillation, the DIR9001 output sample frequency is 96KHz.. I connect the DIR9001's I2S to Tas5713 , but the Tas5713 the Supports 8-kHz to 48-kHz Sample Rate. Because I  want to use CALCULATION OF ACTUAL SAMPLING FREQUENCY, I must use  24.566MHz Oscillation from the datasheet. So what can I do?