TAS5508C EQ GUI

Hi, Terry,

For mature devices, we are not developing new tools.

The tools are much better for the newer devices, TAS5548 and TAS5558. I suggest you look into those devices.

-d2

Hello Terry:

I'm not sure what you mean by the format is not the same.

ALE 5.2 gives you 20 biquad coefficients but it arranges the biquads in 5 rows with 4 bytes of coefficients per row.

The TAS5508C GUI has only one row with a register number preceeded by "X" and followed by 20 bytes.

If you want to use ALE 5.2 and convert to TAS5508C format, this is the following format:

XYY ZZ ZZ ... ZZ

X - is required to denote a new register

YY - register number

ZZ - byte of data (for the EQ biquad, there are 20 bytes; ALE 5.2 first 4 bytes on the top line go to the first 4 bytes right after the register number in the GUI format, and so on).

Best regards,

Tuan

Hi, Terry,

This might help you:

Use ALE5.2 and save it as cfg file in the below format and use the tool to download to the device.

XYY ZZ ZZ  … ZZ

X – must have this character capitalized

YY – the register number

ZZ – the 20 bytes data for the coefficients

-d2