I use TAS5518C with control by I2C and checking signal VALID
For beginning I switch on generator and I2S channel and clear reset of 5518c.
Because of VALID not appear, I read Error Status Register and obtain value 0x40 - PLL auto lock error.
I clear register by value 0 and see that error not appear again.
But signal VALID not appear.
All clock signals are correct by frequency and levels: 13.5 MHz XTL_IN, 24.576 MHz - MCLK, 96 kHz - LRCLK and 6.144 MHz - BitCLK
What I must to check to solve problem
