• Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 2152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Output inductor for TAS5613

Dave Williams
Prodigy 40 points
Other Parts Discussed in Thread: TAS5613

Hello,

I am designing an amplifier around the TAS5613 IC in BTL using BD modulation, and have a question about selection of the output inductor. The inductor specified in the reference design is a Toko C3B-A0336, 10uH, 30mOhm DCR and 5A max. This part is not available through my preferred supplier (Digikey), and was hoping this part would be an acceptable replacement: Talema SW260C-5.0-10, 10uH, 25mOhm DCR and 5A max. They're designed for NI's simple switcher 260kHz systems.

http://www.toko.co.jp/products/pdf/inductors/c3b_amp.pdf

http://www.alfamag.com/PDF/InductorsChokes/Power%20Inductors%20&%20Chokes/SW260_Series.pdf

Without having the core material specified, does this look like it should be an acceptable replacement?

 

Thanks,

Dave Williams