I have used the PCM2900B in a design but it only works with Windows XP
I have tried the PCM2900C and it works with Windows 7.
Is there a difference in the signal levels (for a given digital value) between the PCM2900B and the PCM2900C?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi bd5077,
You can take a look at this Application Report that shows the key differences between the PCM290xB and PCM290xC.
Best regards,
-Ivan Salazar
Texas Instruments
I set the volume in the system mixer to 100%
Judging from Figure 1 and Figure 2 of Application Report (SBFA020–September 2011)
the full scale transfer function should be the same for all conditions.
Is that true?