TPA3156D2: TPA3156D2 protection state

user5282560

Prodigy 120 points

Part Number: TPA3156D2
Other Parts Discussed in Thread: TPA3116D2, TPA3126D2

Customers use TPA3156D2 to do 2*60W. When the sound is maximum, IC enters the state of protection

TI network shows TPA3156D2and TPA3116D2 are pin to pin, it's TPA3116D2's PCB and data.

over 6 years ago

0 Shawn Zheng over 6 years ago

TI__Mastermind 24835 points

Hi Sam,
I think it should be OT issue when output very high power. TPA3116D2 can only output 2*50W power while TPA3156D2 can do up to 2*70W power. It means that the heatsink for TPA3156D2 should be much stronger in heat dissipation. I suppose you are using the same board for these two devices, then could you try with a much powerful heatsink for TPA3156D2 application.
Best regards,
Shawn Zheng

0 user5282560 over 6 years ago in reply to Shawn Zheng

Prodigy 120 points

Do other parameters change in addition to heat dissipation

0 Shawn Zheng over 6 years ago in reply to user5282560

TI__Mastermind 24835 points

Hi Sam,
From application perspective, they are pin2pin devie. TPA3116D2 can be replaced directly by TPA3126D2 in the existing design due to their output power ability is about the same. But TPA3156D2 usually outputs higher power, so it needs more powerful heatsink.
Best regards,
Shawn Zheng

Audio

Audio forum

TPA3156D2: TPA3156D2 protection state