• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 670 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PCM3008: How can we avoid the issue of click noise?

PCM3008: we found the board with PCM3008 can not work.

Lian Wu
Genius 5250 points
Part Number: PCM3008

Dears:

Could you kindly help to check the schematic, and we found the board with PCM3008 can not work.

  • 0
    TI__Guru 57800 points

    Hi, Lian,

    In general the schematic seems fine, just have a question, are VINR and VINL driven by the same input signal?.

    Can you please provide more information about the issues you are having with the device?.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer