LM49270: LM49270: Mono sound

Anton Kosenko

Intellectual 490 points

Part Number: LM49270

I would like to know. Can I set mono audio signal on LM49270? (on the right and left chanell at the same time)

over 5 years ago

0 Ivan Salazar over 5 years ago

TI__Guru* 98235 points

Hi Anton,

There is no internal signal routing/mux that can be configured for this device, so if you want to set the same output signal for both channels you would need to connect both inputs to the same source signal.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

LM49270: LM49270: Mono sound