TAS5717

rodrigo cordero

Prodigy 90 points

Other Parts Discussed in Thread: TAS5717EVM

Hi,

Some one have TAS5717EVM User Guide for application?

I can't find it on the web.

I need to know BOM parts & surrounding parts conexion.
Thanks in advance

RCP

over 13 years ago

0 Matt Lauer over 13 years ago

TI__Expert 7925 points

6724.TAS5717EVM_RevB-Schematic.pdf

Hello, Rodrigo:

The User's Guide for the TAS5717EVM will be completed early this week.

Until then, please use the attached BOM list and schematic for the TAS5717EVM.

Regards,

TAS5717EVM_RevB-BOM.xls

0 rodrigo cordero over 13 years ago in reply to Matt Lauer

Prodigy 90 points

Hello Matt,

Thanks for advance BOM.

I didn't see any schematics attach, could you send it again please?

Taking oportunity for BOM, about L1,L2,L3,L4 (Inductor 15uH), I have only 22uH available on my hand, Is it OK 22uH instead of 15uH? or do I need to change the whole filter components value (res,caps) to match 22uH?

I appreciate your support & time

Regards

RCP

0 Matt Lauer over 13 years ago in reply to rodrigo cordero

TI__Expert 7925 points

Hello, Rodrigo:

The schematic is now at the top of this post.

22uH inductors should work fine. You'll have a little bit of attenuation around 20kHz, but not much.

Regards,

TAS5717EVM_RevB-Schematic.pdf

0 rodrigo cordero over 13 years ago in reply to Matt Lauer

Prodigy 90 points

Hello Matt,

I appreciate.

Regards

RCP

Audio

Audio forum

TAS5717