DIT4096: Asking fort the DIT4096 TX overshoot issues

SHH

Part Number: DIT4096

Hi team,
customer uses DIT4096 on the new application.
However, customer has the Tx overshoot issues.
Here is the waveform. the over shoot voltage is over 6V.

Please refer to the schematic and provide your comments.
txn.box.com/.../14lp6r2gvmx9js6scn8jeaw14s6faty5

BR,
SHH

over 5 years ago

0 Ravi Patil over 5 years ago

TI__Expert 5645 points

Hi SHH,

This is not expected behavior and I'll review the SCH and see if there is any obvious disconnect there resulting in the overshoot. I will have my feedback in a day. Thanks,

Best regards,
Ravi

0 Andy Peters over 5 years ago

Genius 3945 points

The customer needs to learn how to use an oscilloscope. How long is the probe's ground lead, and to what is it connected?

0 SHH over 5 years ago in reply to Andy Peters

TI__Mastermind 30746 points

Hi Peter,
Can you please let me know how's your observation and your setup?
How do you mean that customer need to learn how to use the scope? Are you sure this is related to the scope ground issue?

BR,
SHH

Audio

Audio forum

DIT4096: Asking fort the DIT4096 TX overshoot issues