Hi team,
Is TAS2110 internal tone generator able to generate longer tone than default duration?
Regards,
Itoh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Is TAS2110 internal tone generator able to generate longer tone than default duration?
Regards,
Itoh
Hi, Itoh-san,
Our team will take a look at this thread and will answer as soon as possible.
Best regards,
Luis Fernando Rodríguez S.
Hi Kazuki-san,
The internal tone generator is not set to a specific duration. The tone is enabled and disabled by either TG1_EN register or a selected digital pin.
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators
Hi Ivan-san,
Can TG1_EN controlled by PPC3?
I found TG1_EN on PPC3 register map. I just want to make sure it can enable/disable the tone on EVM.
Regards,
Itoh
Hi Itoh-san,
Yes, this control is available at the Device Control panel of TAS2110 app. You can use the advanced mode for more configuration options as below:
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators
Hi Ivan-san,
I cannot see the image.
Could you please attach the image again?
Regards,
Itoh