• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 633 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3120: Schematic reviews

Kien
Expert 3600 points
Part Number: TLV320AIC3120

Hi team,

Could you please review the below schematic for me? Thank you.

  • 0
    TI__Mastermind 22950 points

    Hello Kien,

    Please find my comments below:

    • Power Supply decoupling looks good. 
    • i see series resistors on the digital interface pins. This is good as it will help with ringing and overshoot.
    • I2C lines should be pulled up to IOVDD. I assume this is happening on another schematic page as I do not see anything here. 
    • The 1kohm resistors at the output concern me. They will limit the output power. it is recommended using ferrite beads

    Regards,
    aaron

  • 0 in reply to Aaron Estrada
    TI__Expert 3600 points

    Aaron,

    Thanks a lot for your prompt help. Much appreciated.