Hi team,
I plan to use PCM1808-Q1 slave mode system clock = 12.288MHz (48khz, 256fs).
Could you give me the rise time and fall time requirement for this clock input?
regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
I plan to use PCM1808-Q1 slave mode system clock = 12.288MHz (48khz, 256fs).
Could you give me the rise time and fall time requirement for this clock input?
regards,
Hello,
Provided the minimum pulse-durations and duty cycles are abided by then a standard logic buffer or MCU GPIO pin will work fine. The overall Audio Serial Interface (SCKI, BCLK, LRCLK) has maximum rise/falls times of 20ns as stated in Figures 22 and 23.