Texas Instruments (TI) Audio support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search audio IC content or ask technical support questions on everything from audio amplifiers (op amps) and audio converters (Codecs and ADCs) to audio interface and media processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TLV320AIC3104: Using CODEC for DC measurements

    Part Number: TLV320AIC3104 Hi, I am using the TLV320AIC3104 to measure a DC signal. What kind of Gain Error results can I expect? What codes should I be seeing on DOUT? Regards, Aaron

  • [FAQ] Audio CODECs and ADCs: Common Noise Issues

    Hello, What are some common noise issues in audio CODECs and ADCs and how can I help prevent them? Regards, Aaron

  • [FAQ] PUREPATHCONSOLE: Audio Software Access Request

    Part Number: PUREPATHCONSOLE Other Parts Discussed in Thread: TAS2563 , Hi, Recently, we have seen many questions related to PurePath Console and their plug-ins requests and access. Here you can find a detailed procedure and examples to request access…

  • [FAQ] How do I design Low Noise & Low Distortion Headphone & Small Signal Audio Amplifiers?

    Part Number: OPA1656 How do I design Low Noise & Low Distortion Headphone & Small Signal Audio Amplifiers? Headphone Amplifiers On-Chip Thin Film Resistors Enable High-Performance Audio Circuitry – SBOA312 Stabilizing Difference Amplifiers…

  • [FAQ] PUREPATHCONSOLE: PurePath Console 3 gets stuck while initializing the device

    Part Number: PUREPATHCONSOLE Hi, In this FAQ you will find a couple solutions to fix the PPC3 stuck symptom during device initialization: You can use a previous version of the installer, it can be downloaded from the attachment ppc3_v3.1.3…

  • [FAQ] TAS2505: Protection Flags and Interrupts

    Part Number: TAS2505 Hi, I would like to gather up some information about this device protection in one place. Our TAS2505 and TAS2505-Q1 devices feature protection scheme against situations like: Overcurrent / Short Circuit Class-D driver…

  • [FAQ] TAS2505-Q1: How to configure TAS2505/TAS2505-Q1 EQ biquads

    Part Number: TAS2505-Q1 Other Parts Discussed in Thread: TAS2505 , COEFFICIENT-CALC Hi, Our TAS2505 and TAS2505-Q1 devices feature up to six programmable biquads that can be used to add some equalization to your application. The GUI for this device…

  • [FAQ] DRV26xx Actuators Selection.

    Other Parts Discussed in Thread: DRV2700 , DRV8662 Hi, When using a haptics driver device from the DRV26xx, DRV2700 and DRV8662 families, there are many questions around the actuator to be used. As general information, we can get some details about…

  • [FAQ] TLV320DAC32: Example Scripts and Unused I/O Pins Connection Tips

    Part Number: TLV320DAC32 Hi! The TLV320DAC32 is one of our low power stereo DAC that supports headphone outputs. This device has 2 registers pages with around 128 registers that need to be configured in order to use all the functions of the TLV320DAC32…

  • [FAQ] TLV320AIC CODECS and ADCs: Input clock jitter and noise specifications

    What is the allowable clock jitter and noise for the input clock to the TLV320ADC and TLV320AIC products?

View FAQ threads