• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 281 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMX2594EVM: Is Reference Pro included?

LMX2594EVM: Reference Pro Board Dimensions

Sunaina Srivastava
Prodigy 50 points
Part Number: LMX2594EVM
Other Parts Discussed in Thread: LMX2594

Hi,

We want to use LMX2594 eval board and want to keep the reference pro board connected . We want to put both these boards together in our application. Please provide the mechanical dimensions of reference pro board. Its not in LMX2594 EVB user guide.

  • +1
    TI__Mastermind 33690 points

    Hi Sunaina,

    Please find the gerbers attached. This should provide mechanical dimensions of the PCB as well as mounting hole placement.

    SV601349A Gerber and Project Outputs.zip

    Regards,

    Derek Payne

  • 0 in reply to Derek Payne
    Prodigy 50 points

    Thank you Derek for the gerber files. Please also share the 3d file of this design in case its there. Actually we wanted to put the LMX and this board together so that it becomes easy to carry. That's why we needed the mechanical dimension which is there in gerber. But 3d file will be an added help.

    Regards

    Sunaina

  • 0 in reply to Sunaina Srivastava
    TI__Mastermind 33690 points

    Sunaina,

    I managed to export the board as a STEP file, hopefully this is sufficient for what you want. I manually dragged the nylon feet away from the mounting holes, but I'm not sure how to use my PCB tool to generate just the PCB without the feet, since our component attaches the through-hole to the feet. Hopefully their position off to the side isn't too disruptive, or else you can find some way to delete those volumes.

    https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/48/SV601349A_5F00_nofeet.step

    Regards,

    Derek Payne