Hello,
Looking at the 0x6C register, I see that there is the "alarm_sysref_sh". The GUI states that :
But in the datasheet, it is marked as reserved :
Is this a 'functioning' alarm? If so, what are CDRV_SER, OSTROBE, 4T?
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Looking at the 0x6C register, I see that there is the "alarm_sysref_sh". The GUI states that :
But in the datasheet, it is marked as reserved :
Is this a 'functioning' alarm? If so, what are CDRV_SER, OSTROBE, 4T?
Thanks
Hi,
This is an internal TI reserved alarm used on the automatic tester to test for SYSREF setup/hold time. It is not meant to be used by our customers. Please ignore and mask this alarm when using the DAC38J8x family. Thank you.
-Kang