This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1235EVM: Problem with EVM and GUI

Part Number: ADS1235EVM
Other Parts Discussed in Thread: ADS1235, DELTASIGMAEVAL-GUI

Hi Experts,

Good day. I have this query from client about GUI issue with ADS1235EVM part. Below is his for report:

"I just go the ADS1235 and power it up. First it boot fine and all LEDs where indicate a healthy state. However, I accidentally entered in a bootloader DFU by pressing BSL and RESET button on the PCB. Now the MCU doesn't start and the red FAULT led shows up.

The first thing I did was installing "DELTASIGMAEVAL-GUI – Delta-sigma ADC EvaluaTIon software" along with "ADS1235EVM-DVCPKG – ADS1235EVM device package.

There was a problem with the GUI, it just couldn't recognize the kit. I was on Windows 11 and maybe that was the problem so I tried with Windows 10, however I accidentally entered in DFU mode I guess?"

Any support on this?

Thank you.

Regards,
Archie A.