Other Parts Discussed in Thread: ADS1298,
Hi Team,
Good day! I am postng this in behalf of the customer. Kindly check the full details below.
We are curently working with the "ADS1298 ECG" evaluation board.
When we hook the "mmb0 modular ewm motherboard" to an Laboratory Power Supply, with 5 volts, it is drawing +3 amps, at around 4 volts, it is basically capping our Power Supply.
The LED's on the boards are turning on, but some components reaches temperatures above 90 degrees celcius, so we turned it off.
We are sure that it's not normal for the motherboard to be drawing 3 amps at any time.
We want so ensure that we hooked it up correctly, before we return the product to you, so we have included some pictures.
sn_customerservice_case_144fb3a5473b055068ef7a51e36d431c_attachments.zip