Hi team,
Is NC pin open internally?
(There is no concern even if the pin is shorted to adjacent one?)
Best regards,
Shota Mago
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Is NC pin open internally?
(There is no concern even if the pin is shorted to adjacent one?)
Best regards,
Shota Mago
Hi Mago-san,
the NC pins are internally bonded actually. You should leave the NC pins unconnected or connect them to GND.
Are you asking because of a pin failure mode analysis? If so, we have a Pin FMA available in the functional safety document for ADS131M02-Q1.
Regards,
Joachim Wuerker
Hi Joachim-san,
Thanks for quick answer!
I'm not sure background of this question, but it seems to be related to failure mode analysis. I will introduce Pin FMA data of Q1.
Best regards,
Shota Mago