Other Parts Discussed in Thread: ADC122S021
We are using TLV2542 in our design, We tried giving MUX reset cycles 4 to 7 clocks with CS low.
We are repeating these 4 bit cycles for 5 time - so that at once the MUX will get RESET. Tried even with single cycle, but the result is same.
But unfortunately the reset is inconsistent, sometimes MUX reset to AI0 or some times AI1.
We are looking for other pin compatible part, where dual channel selection is possible using SPI firmware through some internal register.
Kindly suggest suitable part.
And help to resolve the issue.
Regards,
Amit