AFE58JD48EVM: Data transfer directly to HSDC via USB

bi zelin

Part Number: AFE58JD48EVM

We currently want to design a data directly from the function generator through the SMA interface to the AFE58JD48EVM, and then directly through the EVM on the J5 USB interface to the PC on the HSDC software, would like to know whether there is a mature programme or whether it is feasible, thank you!

3 months ago

+1 Sachin H K 3 months ago

TI__Intellectual 2465 points

You need LVDS/JESD capture to do this . For that we typically use FPGA to capture the data . So without using FPGA how are you going to capture the data ?

Giving the input should be ok .If your function generator spec is good you can give the signal directly from it to EVM,

0 bi zelin 3 months ago in reply to Sachin H K

Prodigy 60 points

Thank you very much for your reply！

I figured it out！

Data converters

Data converters forum

AFE58JD48EVM: Data transfer directly to HSDC via USB