• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 56 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADC12DL3200: Sample error issue

ADC12DL3200: Non Deterministic Error on Samples from ADC

George Lucian Chiriac
Prodigy 40 points
Part Number: ADC12DL3200

Tool/software:

Hi Team,

We are working actually with a custom board with the same ADC converter and we experience the same issue sometimes. This is not deterministic and is experienced casually on a channel or on the other one.

The configuration of the chip is:

-Dual Channel- 4 bus Mode

-FADC = 2GHz

-SYSREF = 12.5MHz 

And finally we put the strobe on the LSB.

How we can manage this issue? Thank you so much.

-Best Regards! 

  • 0
    TI__Expert 3670 points

    Hello George,

    Can you please share some details. Are you able to share a complete list of all the register writes performed to the part.

    Additionally can you try and put the ADC into a user defined test pattern mode and ensure that the output matches just to ensure that the FPGA is receiving the data correctly.

    Best,

    Eric