HSDC Pro Configuration GUI for ADC16DX370EVM + TSW14J10EVM & KC705

Kazuhiko Ogawa

Other Parts Discussed in Thread: ADC16DX370EVM, ADC16DX370

Hallo,

The customer is using High Speed Data Converter Pro with ADC16DX370EVM + TSW14J10EVM + Kintex KC705.
But he cannot see the `ADC16DX370' tab appear in HSDC Pro GUI as below.

I think he needs to install the Configuration GUI for the ADC16DX370EVM.
Could you please send me the Configuration GUI for the ADC16DX370EVM?

Best Regards,
Kazu Ogawa

over 9 years ago

0 Joshua Carnes over 9 years ago

TI__Expert 4340 points

Kazu,

We are looking into this request and will get back to you as soon as possible. We will provide you with the necessary files to run the ADC16DX370EVM with the TSW14J10+KC705.

Thanks, Josh

0 Joshua Carnes over 9 years ago in reply to Joshua Carnes

TI__Expert 4340 points

Kazu,

At this time, a special procedure is required to use the ADC16DX370EVM with the TSW14J10EVM + KC705 and it is proven to work. Though, it is not possible to provide the procedure and necessary files via E2E. Please contact your direct field applications or sales contact for TI so that we may establish a channel through which the procedure can be provided.

The cconfiguration GUI for the ADC16DX370EVM for be downloaded from the web at

http://www.ti.com/tool/adc16dx370evm

Thanks, Josh

Data converters

Data converters forum

HSDC Pro Configuration GUI for ADC16DX370EVM + TSW14J10EVM & KC705