• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 381 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC34J45: Test plan using Altera Arria10 SoC Evaluation Board

Michal Pereg
Prodigy 30 points
Part Number: ADC34J45

Hello,

I want to test the ADC34J45 device using Arria10 SoC Evaluation Board.

My plan is using the following cards for testing purpose (Until we'll get the real board):

Testing plan diagram:

Did I use the right cards for the specific component and whether it connects like the diagram above?

Thanks,

Michal

  • 0
    TI__Genius 12965 points

    Michal,

    You do not need the HSMC to FMC adapter.  The ADC34J45EVM has an FMC connector on it.  You can connect this directly to FMC equipped FPGA platforms.  It will also plug into FMC+ carrier platforms since FMC mezzanine is compatible with FMC+ carrier.

    We evaluate the ADC34J45EVM on our TSW14J56 platform (FMC with Arria V) using the Altera Megacore IP so this should be no problem.

    Ken