ADCPro Connection method ADS1263EVM-PDK

SHOGO OZONO

Other Parts Discussed in Thread: ADS1263EVM-PDK

Based on the URL below, customers have been evaluated ADS 1263 EVM.
But,ADCPro Can't Connect to ADS1263EVM-PDK.

https://e2e.ti.com/support/data_converters/precision_data_converters/f/73/t/350790?tisearch=e2e-quicksearch&keymatch=ADCPRO%20Can%27t


Customers are using Windows XP PC,the following sentences are not displayed.


“Disable Driver Signature enforcement”


In this case, please tell me how to do it.

over 6 years ago

0 Tom Hendrick over 6 years ago

TI__Guru**** 171836 points

Hi Shogo,

Welcome to our e2e Forum! Windows XP machines won't have the same boot options described in the post you refer to above. It's actually better to do a search for 'ADS1263EVM-PDK' directly and you would find this post: e2e.ti.com/.../651534

Please review the details there and see if that resolves your installation problem.

0 Christopher Hall over 6 years ago in reply to Tom Hendrick

TI__Mastermind 44600 points

Hi Shogo,

I believe that Windows Driver Signature Enforcement only applies to Windows 7 and above. Has the customer tried re-installing the MMB0 driver found here: ftp.ti.com/.../ ?

NOTE: They will need to select the 32-bit or 64-bit installer option, per their operating system architecture.

Best regards,
Chris

0 Christopher Hall over 6 years ago in reply to Christopher Hall

TI__Mastermind 44600 points

Hi Shogo,

We haven't heard back from you in a while on this issue. Were you able to resolve this problem or do you still need more assistance from us?

Thanks and best regards,
Chris

Data converters

Data converters forum

ADCPro Connection method ADS1263EVM-PDK