ADC34J25EVM: Connect ADC34J25EVM/TSW14J10/ZCU102

Ethan,

The TSW14J10EVM does not support operation with the ZCU102.  I would suggest you download the Xilinx example source code from the Xilinx website to get this interface up and running.  You should be able to get this running by plugging the ADC EVM directly into the FMC connector of the ZCU102. We have tried this with another TI EVM, the ADC12DJ1350. See the attached document for more info regarding this setup.

Regards,

Jim

ZCU102 ADC12DJ1350 JESD Reference Design User Guide.pdf

Hi Jim,

Thanks. We tried the ADC34J25EVM directly on ZCU102. It seems not working. Not sure if our JESD setting was incorrect. We saw clock locked but the rx_tvalid is low and all rx_tdata are zero.

We use configuration ADC3xJxx_160MSPS_Operation_LMK_Setting.cfg downloaded from TI, and LMFS 4,4,2,1 with 160MHz Ref clock for JESD204B.

What is special about TSW14J10? Since we had another evaluation board ADS54J60EVM which works on ZCU102 through TSW14J10 adaptor. If we connect ADS54J60EVM directly on ZCU102, the ADC stops working. 

Thanks,
Ethan

Also, we only see reference design of TSW14J10 on Xilinx website.

www.xilinx.com/.../jesd2014-reference-designs.html

There seems no reference design for ADC12DJ1350. In the document you provided, there is a file "ZCU102_12DJ1350_8G.xpr.zip". Do you know where we can download it? Thank you so much.

Ethan,

You can download this project from the link below.

Regards,

Jim

txn.box.com/.../u6r17gch30inmwkncaokj0remtdy3nfb