• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 533 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC7573: Does the DAC output require an OP AMP configuration?

Lian Wu
Genius 5250 points
Part Number: DAC7573

Dears:

Could you kindly help to check the design:

1. Address Use A0, A1. If A2, A3 is not used, is it OK about the below design?
2. If the DAC output VREFL and VREFH circuits is together, is it wrong, how can we design it?.
3. Does the DAC output require an OP AMP configuration? If necessary, how can we design it?.

  • 0
    TI__Mastermind 46290 points
    Lian,

    All of the address pins need to be connected to logic high or logic low for reliable communication. If A2 and A3 are left floating, the address configuration is unknown. It looks like they have these pins connected to test points so maybe they were planning to use some external source to configure those pins?

    I do not understand the second question. Can you clarify please?

    The DAC output is a buffered voltage - there is an internal amplifier. Therefore an amplifier is not required to use the DAC.
  • 0 in reply to Kevin Duke
    TI__Mastermind 46290 points
    Hello Lian,

    Do you have any clarification on the second question?