ADS1263EVM-PDK: MMB0

LH Ji

Prodigy 100 points

Part Number: ADS1263EVM-PDK
Other Parts Discussed in Thread: ADCPRO

Where can I download the device driver for MMB0 interface board?

over 5 years ago

0 Christopher Hall over 5 years ago

TI__Mastermind 44600 points

Hi LH,

The MMB0 driver is provided with the ADCPro Plugin installation. After installing an MMB0 plugin you can find the device driver in the following directory:

C:\Program Files (x86)\ADCPro\MMB0 Drivers

Best regards,
Chris

0 LH Ji over 5 years ago

Prodigy 100 points

This package installed only ADC_pro, which not include MMB0 driver. There is no such a directory C:\Program Files (x86)\ADCPro\MMB0 Drivers

Please help.

0 LH Ji over 5 years ago in reply to Christopher Hall

Prodigy 100 points

This package installed only ADC_pro, which not include MMB0 driver. There is no such a directory C:\Program Files (x86)\ADCPro\MMB0 Drivers

0 Christopher Hall over 5 years ago in reply to LH Ji

TI__Mastermind 44600 points

Hi LH,

The ADCPro installer doesn't include this driver. It is only provided in the Plugin installer.

The Plugin installer can be downloaded from here: http://www.ti.com/tool/ads1262evm-pdk

Best regards,
Chris

0 LH Ji over 5 years ago in reply to Christopher Hall

Prodigy 100 points

Again, This package, ADS1262EVM-PDK, does not include driver for MMB0 board. PC shows an "Unknown" device.

0 Christopher Hall over 5 years ago in reply to LH Ji

TI__Mastermind 44600 points

Hi LH,

Were you able to find the MMB0 driver within the ADS1262EVM-PDK-SW package?

I tried downloading it and verified that the MMB0 driver was installed in the location I mentioned earlier. If somehow you managed to change the location of the ADCPro installation, then you may need to go look in the modified installation directory.

Best regards,
Chris

Data converters

Data converters forum

ADS1263EVM-PDK: MMB0