This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1298ECGFE-PDK: ADS1298 and MCU Interfacing

Part Number: ADS1298ECGFE-PDK
Other Parts Discussed in Thread: ADS1298RECGFE-PDK, , ADS1298

We get the ADS1298RECGFE-PDK and after setup we get result as per the user guide.

My ADS1298 hardware design is as per the  ADS1298ECGFE-PDK Document (with out Respiration). My question is what is the exact work done by MCU/DSP controller in MMBO Board in the evaluation board is that used for any digital filtration of ECG signal . In our prototype design we think to make ADS1298 with Raspberry pi / MCU. so that is sufficient or we need an extra circuit like DSP in between ADS1298 and Raspberry pi to get the good result.

  • Hello Koustubh,

    Welcome to our forum and thank you for your post!

    The source code for the ADS1298RECGFE-PDK (same as the non-R version) is available for download. You can find the link and other related materials on the EVM product folder as well as in our ADS129x BIOFAQ page.

    Exactly how you post-process the data, what algorithms and hardware you require is up to you and beyond our expertise.

    Best regards,