ADC101S021: Theta_JC (both top and bottom)

Hi Danilo,

This information is not readily available.  We'll see if the thermal modeling team can accommodate the request, so please give us a few days to get back to you.

Hi Danilo,

A thermal model request was submitted.  The process can take up to two weeks, so I'll give more detail once its available.

Hi Tom,

Thank you for your support. We will wait for the data and will send follow up emails after 1-2 weeks.

Regards,

Danilo

Hi Tom,

I just want to confirm if the customer's request for the value of theta_JC (both top and bottom) of ADC101S021CIMF/NOPB would be available early next week?

Regards,

Danilo

Hi Tom, 

Thank you very much for these information which you have provided much earlier than scheduled.

Thank you for your support.

Regards,

Danilo

They say 'up to two weeks' but its usually faster...

Hi Tom,

We really appreciate the fast turn around time. However, can we also request for the bottom Theta JC of the device?

Regards,

Danilo

They said "n/a" for the bottom, so let me check into that.

Hi Danilo,

Theta-JC (Bottom) is only applicable to packages with exposed pads, which the DBV (SOT) package does not have.  Can you clarify why you are expecting this value or if you have a different definition?